Home / Consumables and accessories

Consumables and accessories

Advanced Testing Instruments supplies the testing reagents, tubing and accessories that keep your aerosol photometers, generators and microbial air samplers working reliably during cleanroom testing and monitoring.

ATI

Testing reagents and accessories

Support

Keep your instruments running

PAO4 testing reagent

PAO4 oil (polyalphaolefin) is used with cold DOP style aerosol generators, commonly alongside aerosol photometers, for HEPA filter testing. It is a safe alternative to DOP (dioctyl phthalate), which has been classed as carcinogenic. PAO4 oil is available in 10 litre drums and suits GTI aerosol generators used for cleanroom and safety cabinet validation.

Use it with

Aerosol generators

Safer

A safe alternative to DOP oil.

Proven

Used for HEPA filter testing.

Supplied

Available in 10 litre drums.

Excelon Bev-A-Line XX

Tubing properties

Particulates do not adhere to the inner surface
High-purity, inert Hytrel liner
High temperature and oil resistant
Abrasion and chemical resistant
Resists next-batch contamination
Gas permeable
Withstands repeated autoclaving

Bev-A-Line / Hytrel tubing

Excelon Bev-A-Line XX has a sturdy but flexible outer shell with a smooth inner lining that resists abrasion, chemical attack and next-batch contamination. It is gas permeable and withstands repeated autoclaving without the layers separating.

Its co-extruded construction saves on installation compared with conventional braided tubing, and the high-purity Hytrel liner is comparable to polyether-based urethanes for moisture permeability. With its low permeability, Bev-A-Line XX also suits refrigerant gases and hydrocarbons.

Match it to your setup

Tell us which aerosol photometer, particle counter or microbial air sampler you are using and we will help you choose suitable tubing and lengths for your testing.

Specifications

Product	Excelon Bev-A-Line XX (Hytrel lined)
Available sizes	0.250″ ID × 3/8″ OD × 1/16″ wall 0.375″ ID × 1/2″ OD × 1/16″ wall 0.500″ ID × 5/8″ OD × 1/16″ wall
Construction	Co-extruded outer shell with a smooth, inert inner liner
Liner	High-purity Hytrel, high temperature and oil resistant
Sterilisation	Withstands repeated autoclaving
Applications	High-purity air sampling, particulate matter and applications requiring UV resistance

High pressure diffuser (HPD2)

The EMTEK HPD2 samples compressed air and gas systems for microbial contaminants with EMTEK P100 or V100/RCG microbial air samplers, and/or for total particulates with a laser particle counter.

It is made from electropolished 316 stainless steel and allows HEPA filtration of the exhausted volume, which also greatly reduces noise. The unit can be autoclaved or chemically sanitised for microbial testing of critical systems.

Sample rates	28.3–50 LPM or 75–100 LPM configurations
Material	Electropolished 316 stainless steel
Exhaust	HEPA filtered, reduced noise
Sanitising	Autoclavable or chemically sanitised
Works with	EMTEK P100, V100/RCG samplers and laser particle counters

Sampling of

Compressed air and gas

Works with

EMTEK remote samplers

EMTEK V100 controller

The Versatile 100 (V100) adds a high level of versatility to microbial air sampling. It controls EMTEK remote samplers such as the R2S remote slit sampler, which uses industry standard slit-to-agar methodology for accurate air quality analysis. Talk to us about the right controller and sampler combination for your cleanroom monitoring.

Operates	1 to 4 RAS samplers, or 1 or 2 R2S or RCG confined space samplers
Sample rates	Mass flow controlled at 28.3, 50 and 100 LPM
Monitoring	0–120 minutes of active monitoring per test period, with delay, hold, run and pause/resume
Interface	Colour touch screen LCD and IR remote control
Data	Memory for more than 500 samples and 300+ sample locations, on-board label printer, Ethernet and USB
Exhaust	2 micron filtered HEPA exhaust
Case	Easy-to-sanitise Kydex with Microban / 316 stainless steel, extendable handle
Weight and size	5.5 kg, approx. 25 × 20 × 18 cm (L × W × H)
Power	115 VAC at 60 Hz and 220 VAC at 50 Hz

Spares and accessories

We also supply spares and accessories for the instruments we sell, and can arrange servicing, repairs and ISO/IEC 17025 calibration through Fotometrix to keep your equipment in reliable working order.

Includes

Spares and support

Order the right consumables for your instruments

Tell us which instruments you use and what you need, and we will confirm supply.

Tell us your instruments

Share the instruments you use and the items you need.

We confirm supply

We confirm availability, quantities and lead times.

Order with confidence

You receive a clear quote, with local support for your instruments after delivery.